why does my circuit breaker keep tripping
We can judge whether the circuit breaker has been damaged by the following points:
1. Circuit breaker is no power
If there is no power in a circuit or an electrical outlet, it could be due to a tripped or broken circuit breaker.
2. The circuit breaker is hot or has a burnt smell
If you notice that the circuit breaker in the distribution box has a burning smell, or feel that the circuit breaker is hot, you need to immediately turn off all the power at home, call the local electrician immediately to confirm the situation.
3. There are burn marks on the circuit where the circuit breaker is located
If you notice burnt marks on the sockets and electrical equipment on the socket, you also need to call the local electrician in time, because the burnt marks mean that the wires in the circuit have melted due to high temperature, and electrical fires are easy to occur.
4. The circuit breaker is old
Circuit breakers can work for a long time, but not forever. The quality of the old circuit breakers will deteriorate and problems will arise, and we need to replace the circuit breakers in time.
5. Obvious external damage to the circuit breaker
The temperature rise caused by the failure of the circuit breaker will basically affect the circuit breaker product itself. If you find obvious external damage on the product, you need to call the local electrician immediately.
Precautions for replacing circuit breakers
It is not advisable to repair the circuit breaker because there is no guarantee that the repaired circuit breaker will continue to function. So when a circuit breaker is damaged, it is necessary to remove the old circuit breaker and install a new one.
The replacement of the circuit breaker requires some basic electrical knowledge. It is not difficult to replace the circuit breaker, but it requires extra care and must not work on live circuits. Before working, be sure to use a multimeter voltage tester to check that the equipment is live. If you don’t already know how to work in a circuit board, you need to call your local electrician.
Why do we need to know if the circuit breaker is broken?
Source: Envato
A functioning circuit breaker can effectively protect equipment safety by tripping, Preventing accidents from happening.
A damaged circuit breaker poses the risk of an electrical fire.
So we have to know the condition of the circuit breaker, And can take timely and effective measures to a certain extent.
Cost to replace circuit breaker
Different countries, different sizes of distribution boxes, hiring an electrician, or doing it yourself will all have an impact on the cost.
Basically, it costs about $50 to $100 to replace one circuit breaker, which includes the breaker and labor costs.
For your own safety, labor costs cannot be saved, and the installation process should still be handed over to professional electricians.
Conclusion
circuit breaker keeps tripping is a red flag.