how do you change a breaker switch
breaker fuse
Introduction to Ethernet
Ethernet, a communication standard established in the early 1980s, facilitates networking for computers and devices within local environments like homes and buildings.
This standard is vital for Local Area Networks (LANs), connecting multiple devices to enable seamless information creation, storage, and sharing within the specific location. Originally utilizing coaxial cables, Ethernet has since advanced to employ twisted pair copper wiring and fiber optic technology, enhancing its reliability and performance.
Did you know that twisted pair wiring was invented by Alexander Graham Bell in 1881?
Ethernet was officially standardized as IEEE 802.3 by the Institute of Electrical and Electronic Engineers (IEEE) in 1983. This standardization outlined the physical and MAC (media access control) aspects of the “data link” layer for wired Ethernet.
These layers correspond to the first two layers of the OSI (Open Systems Interconnection) model. The physical layer encompasses components such as cabling and devices.
Ethernet Physical Layer
Ethernet Cables
Let’s begin by exploring Ethernet cabling options.
Ethernet cables are available in various forms, including:
Coaxial cable (less common in modern installations)
Twisted pair
Fiber optic
Discover more about Ethernet cabling options in the following sections.
Twisted Pair Cables
Twisted pair cables are the predominant choice, with the most recent options being:
– Category 6 supporting speeds up to 1 Gbps.
– CAT6a and CAT 7 supporting speeds up to 10 Gbps.
– Category 5 and 5e cables continue to be utilized in various applications, offering speeds ranging from 10 Mbps to 100 Mbps, albeit more susceptible to noise interference.
Learn more about the latest twisted pair cable options and their capabilities for different networking needs.
The Ethernet twisted pair employs RJ-45 eight-pin connectors at each cable end, configured for bidirectional data transmission in half or full-duplex mode.
In “half-duplex,” data moves in only one direction at a time, whereas “full-duplex” enables simultaneous bidirectional data transfer.
For full-duplex operation in Ethernet, two wire pairs are utilized to facilitate concurrent data transmission in both directions.
Fiber Optic Cables
Fiber optic cables utilize glass or plastic optical fibers to transmit data via light pulses, enabling Ethernet to achieve greater speeds over longer distances.
Different types of connectors are employed in fiber optic cables, tailored to specific application requirements.
Various connector types include SFP (Small Form Pluggable or Small Factor Pluggable) and SC (Subscriber Connector, also known as Square Connector or Standard Connector).
To integrate fiber optic technology into an Ethernet network using twisted pair cabling, an “Ethernet to Fiber Converter” is essential.
This device enhances network speed with fiber optics and extends the network’s reach.
Ethernet Devices
Looking for information about Ethernet devices? Ethernet devices include computers, printers, and any other device equipped with either an internal NIC (network interface card) or an external one that is USB or PCI based.
Switches and Routers
“Switches” and “Routers” function as network directors, linking multiple computers or networks together to facilitate seamless communication among various devices.
Gateways and Bridges
“Gateways” and “Bridges” serve to interconnect multiple Ethernet networks, facilitating seamless communication between them.
A “Gateway” links two different networks together.
On the other hand, a “Bridge” joins two similar networks, presenting them as a single network entity.
After reviewing the fundamental physical elements of Ethernet, let’s delve into the second layer of the OSI model – the data link layer.
Ethernet Data Link Layer
the data link layer divides into two key segments:
– Logical Link Control (LLC)
– Media Access Control (MAC)
The “Logical Link Control” sets up data pathways within Ethernet networks to enable device-to-device data transmission.
Meanwhile, the “Media Access Control” utilizes unique hardware addresses assigned to Network Interface Cards (NIC) to pinpoint specific computers or devices, revealing the origins and destinations of data transmissions.
Ethernet facilitates the transmission of data packets within the data link layer through an algorithm known as CSMAIn the data link layer, Ethernet employs the CSMA/CD (Carrier Sense Multiple Access with Collision Detection) algorithm to transmit data packets efficiently.
CSMA/CD serves as the Ethernet standard, facilitating reduced data collisions and enhanced data transmission success rates.
This algorithm initiates by checking the network for ongoing traffic. If the coast is clear, it sends out the initial data bit to test for potential collisions.
Upon successful transmission of the first bit, it proceeds to transmit the remaining bits while constantly monitoring for collisions.
In the event of a collision, CSMA/CD triggers a calculated waiting period before restarting the transmission process until completion.
Furthermore, when implementing quicker Ethernet speeds in full-duplex modes along with switches, a star topology emerges between switch ports and connected devices.
This configuration offers more direct transmission routes and minimizes collisions compared to a bus topology, wherein all devices share the same communication pathways.
Advantages and Disadvantages of Ethernet Technology
The landscape of Ethernet technology is evolving rapidly with the emergence of new advancements. As we approach higher speeds beyond the 1 Gbps threshold, such as the recent introduction of 10 Gbps speeds, it is essential to understand the cost implications associated with adopting these cutting-edge Ethernet technologies.
Unlocking Boundless Opportunities: Expanding Your Network from Ethernet LAN to WAN The transition from an Ethernet Local Area Network to a vast Wide Area Network opens up a world of possibilities in the realm of information exchange. However, delving deeper into this topic deserves its own dedicated blog post.
Ethernet remains a popular networking option due to its optimal blend of speed, affordability, and easy setup. Its widespread adoption in the computer industry and compatibility with various network protocols further solidify its standing. We appreciate your readership! Feel free to share your inquiries and thoughts; we’ll be happy to engage with you shortly!